GUX - Explosion Proof Unit Heaters
Explosion proof unit heaters are designed to heat areas classified as hazardous locations designated as Class I, Group C & D Division 1 & 2 or Class II, Groups E, F and G with a T3B ignition temperature code rating (329ºF, 165ºC) or higher to provide primary or supplementary heating for comfort or freeze protection. Typical applications involve oil refineries, sewage treatment plants, petrochemical plants, oil rigs, unattended pumping stations, chemical storage and handling facilities, paint storage areas and countless other hazardous areas covered by these classifications.
CONTROLS - Pre-wired, self-contained control center. Standard controls include automatic reset thermal limit, a magnetic contactor and 24 volt control circuit transformer.
HEAT EXCHANGER - Advanced design allows lower operating temperatures from the liquid to air heat exchanger with steel tubes, aluminum fins, a non-toxic heat transfer fluid, and a pressure relief plug.
OPTIONAL CONTROLS - Includes a factory built-in thermostat, disconnect switch, fan selector switch, 120V control circuit and pilot light.
HIGH LIMIT CUTOUTS - A manual reset high limit cutout unit is standard. (An additional automatic reset high limit cutout is available as an option.)
FAN & MOTOR - Ball bearing permanently lubricated explosion proof motor has built-in thermal overload protection.
CABINET - Powder coated heavy gauge steel cabinet surrounding a 14 gauge heavy-duty steel frame which supports internal components.
11/21/2007
Stelpro ARWF1501W Fan Forced Electric Wall Heaters
Stelpro ARWF1501W Fan Forced Electric Wall Heaters
SPECIFICATIONS:
750 Watts (2560 BTU's)
or
1,500 watts (5,118 BTU's)
120 volts/ 1 phase
12.5 Amps
CFM: 75 CFM
Weight: 6 Lbs
Color: White Finish
Epoxy polyester powder coat.
Can be Mounted horizontal or vertical
Made in Canada
DIMENSIONS:
Front Grille Dimension:
8 11/16"W x 7/8"D x 17 1/8"H
Back Box Dimension:
6 1/2"W x 2 3/8"D x 14 1/2"H
Features:
CONSTRUCTION:
• 20 gauge steel cabinet with 18 gauge grill.
• Thermal protection with automatic reset.
• Safe rounded corners.
ELEMENT:
• Top quality nickel-chrome element for instant heat.
THERMOSTAT:
• Built-in: Double pole thermostat . (ARWFT-2)
OR
• Standard: Wall Mounted thermostat (T410B)
Click here for more Info
• Sensing Element: Bimetal.
• Setpoint Adjustment: Setting dial on the face of the thermostat.
• Temperature Range: 40° to 80°F (5° to 25°C)
• Differential: 3°F (2°C), nonadjustable.
• Switching: Micro Switch snap-acting switch.
OR
• Digital: Wall Thermostat (STE402)
Click here for more Info
Max Load: 16.7A
• 2000 Watts at 120 Volts
• 4000 Watts at 240 Volts
• Sensing Element: Digital
• Setpoint Adjustment: Setting button on the face of the thermostat.
• Temperature Range: 37° to 86°F (3° to 30°C)
• Differential: .5°F (.5°C), nonadjustable.
OR
Programmable: Wall Thermostat
Click here for Factory Web Site (TH106)
TEMPERATURE CONTROL
• Microprocessor-optimized PIA
• Heating cycles: 15 seconds
• Accuracy: ± 0.15ºC / 0.27ºF
SWITCHING ACTION
• TRIAC: Silent operation
PROGRAMMING
• 7-day, 4 time periods/day, 2 temp. settings
• Pre-programmed or personalized schedule
• Early Start function
• Selectable 12- or 24-hour clock / ºC or ºF
TIMER: - Spring Wound - Intermatic Model FD60MW
- Click for Cut-Sheet
Timer Specifications
Switch Rating –
Inductive: 20 Amp 125 VAC 50/60 Hz; 10 Amp 250 VAC 50/60 Hz; 10 Amp 277 VAC 50/60 Hz,
Tungsten: 7 Amp 125 VAC,
Motor: 1 HP 125 VAC 50/60 Hz; 2 HP 250 VAC 50/60Hz
Caution: Do not use for sunlamps, sauna, etc...
Colors – Available in White, and Ivory,
Style – Decorator Styling - Can be used with decorator or toggle type switch plates.
HEATER INSTALLATION
• Wall mounted only. May be recessed in 2" x 3" walls.
• Surface adapter for surface mounting (not included).
• 4 positions, horizontal or vertical wall mounting.
Warranty
• 10 years on element and 1 year on components.
Optional Accessories
• Surface Mounting Adapter (Surface Mount)
Recessed mount or surface mounted wall heater options. With the recess mount option the wall heater in cut into the sheetrock wall. The surface mount option is often used on concrete walls.
Stelpro Model - ARWF1501W - Electric Wall Heaters
Electric wall heaters are ideal for a bathroom, bedroom, kitchen & more.
Stelpro ARWF1501W Fan Forced Electric Wall Heaters
SPECIFICATIONS:
750 Watts (2560 BTU's)
or
1,500 watts (5,118 BTU's)
120 volts/ 1 phase
12.5 Amps
CFM: 75 CFM
Weight: 6 Lbs
Color: White Finish
Epoxy polyester powder coat.
Can be Mounted horizontal or vertical
Made in Canada
DIMENSIONS:
Front Grille Dimension:
8 11/16"W x 7/8"D x 17 1/8"H
Back Box Dimension:
6 1/2"W x 2 3/8"D x 14 1/2"H
Features:
CONSTRUCTION:
• 20 gauge steel cabinet with 18 gauge grill.
• Thermal protection with automatic reset.
• Safe rounded corners.
ELEMENT:
• Top quality nickel-chrome element for instant heat.
THERMOSTAT:
• Built-in: Double pole thermostat . (ARWFT-2)
OR
• Standard: Wall Mounted thermostat (T410B)
Click here for more Info
• Sensing Element: Bimetal.
• Setpoint Adjustment: Setting dial on the face of the thermostat.
• Temperature Range: 40° to 80°F (5° to 25°C)
• Differential: 3°F (2°C), nonadjustable.
• Switching: Micro Switch snap-acting switch.
OR
• Digital: Wall Thermostat (STE402)
Click here for more Info
Max Load: 16.7A
• 2000 Watts at 120 Volts
• 4000 Watts at 240 Volts
• Sensing Element: Digital
• Setpoint Adjustment: Setting button on the face of the thermostat.
• Temperature Range: 37° to 86°F (3° to 30°C)
• Differential: .5°F (.5°C), nonadjustable.
OR
Programmable: Wall Thermostat
Click here for Factory Web Site (TH106)
TEMPERATURE CONTROL
• Microprocessor-optimized PIA
• Heating cycles: 15 seconds
• Accuracy: ± 0.15ºC / 0.27ºF
SWITCHING ACTION
• TRIAC: Silent operation
PROGRAMMING
• 7-day, 4 time periods/day, 2 temp. settings
• Pre-programmed or personalized schedule
• Early Start function
• Selectable 12- or 24-hour clock / ºC or ºF
TIMER: - Spring Wound - Intermatic Model FD60MW
- Click for Cut-Sheet
Timer Specifications
Switch Rating –
Inductive: 20 Amp 125 VAC 50/60 Hz; 10 Amp 250 VAC 50/60 Hz; 10 Amp 277 VAC 50/60 Hz,
Tungsten: 7 Amp 125 VAC,
Motor: 1 HP 125 VAC 50/60 Hz; 2 HP 250 VAC 50/60Hz
Caution: Do not use for sunlamps, sauna, etc...
Colors – Available in White, and Ivory,
Style – Decorator Styling - Can be used with decorator or toggle type switch plates.
HEATER INSTALLATION
• Wall mounted only. May be recessed in 2" x 3" walls.
• Surface adapter for surface mounting (not included).
• 4 positions, horizontal or vertical wall mounting.
Warranty
• 10 years on element and 1 year on components.
Optional Accessories
• Surface Mounting Adapter (Surface Mount)
Recessed mount or surface mounted wall heater options. With the recess mount option the wall heater in cut into the sheetrock wall. The surface mount option is often used on concrete walls.
Stelpro Model - ARWF1501W - Electric Wall Heaters
Electric wall heaters are ideal for a bathroom, bedroom, kitchen & more.
Stelpro ARWF1501W Fan Forced Electric Wall Heaters
Shop Heaters
We have a wide selection of electric work shop Heaters for your home, Portable electric Shop Heaters with cord and hardwired Shop space Heaters.
Like the Electric Garage / Shop Unit Heaters Stelpro RUH5T.
Electric garage shop space heaters put out 5,000 watts (17,065 BTU's).
The RUH model space unit heater is small on price but big on heat. It's the perfect choice to heat a garage, home workshop, or small green house.
Quiet, lightweight and easy to install with a universal wall or ceiling mounting bracket.
Like the Electric Garage / Shop Unit Heaters Stelpro RUH5T.
Electric garage shop space heaters put out 5,000 watts (17,065 BTU's).
The RUH model space unit heater is small on price but big on heat. It's the perfect choice to heat a garage, home workshop, or small green house.
Quiet, lightweight and easy to install with a universal wall or ceiling mounting bracket.
Luxury Bathroom Electric Wall Heater Stelpro SILVC1560W (240volts)
Product #: Stelpro SILVC1560W
Finish: White
Width: Grille - 13 3/8"
Height: Grille - 18 3/4"
Depth: Grille - 1 3/4"
Wattage: Low 750 & High 1,500
Weight: 20 lbs
Volts: 240
Controls: Built-In Thermostat & Timer
Amps: 6.25
Warranty: 10 years on element and 1 year on components
Finish: White
Width: Grille - 13 3/8"
Height: Grille - 18 3/4"
Depth: Grille - 1 3/4"
Wattage: Low 750 & High 1,500
Weight: 20 lbs
Volts: 240
Controls: Built-In Thermostat & Timer
Amps: 6.25
Warranty: 10 years on element and 1 year on components
Bathroom Heaters
Product #: Stelpro SILVC1560SS
Finish: Stainless Steel
Width: Grille - 13 3/8"
Height: Grille - 18 3/4"
Depth: Grille - 1 3/4"
Wattage: Low 750 & High 1,500
Weight: 20 lbs
Volts: 240
Controls: Built-In Thermostat & Timer
Amps: 6.25
More Information: Click the above DESCRIPTION TAB
Warranty: 10 years on element and 1 year on components
Finish: Stainless Steel
Width: Grille - 13 3/8"
Height: Grille - 18 3/4"
Depth: Grille - 1 3/4"
Wattage: Low 750 & High 1,500
Weight: 20 lbs
Volts: 240
Controls: Built-In Thermostat & Timer
Amps: 6.25
More Information: Click the above DESCRIPTION TAB
Warranty: 10 years on element and 1 year on components
11/09/2007
Qmark MUH Electric Unit Heaters
Qmark MUH0321 Electric unit heaters mount either horizontally or vertically. Totally versatile. For work shops, garages, basements. Can be used for primary, supplementary, spot, or dual-system heating.Fearures:
• Heavy gauge die-formed steel housing. Two-toned, smartly styled.
• Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.
• Specially designed venturi outlet to meet that added throw as required in vertical position.
• Branch circuit fusing (when required).
• Completely enclosed fan motor.
• Aluminum-finned, copper clad steel sheath heating element has longer useful life, because of cooler sheath temperature and faster heat dissipation.
• 24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3KW and 5KW, 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).
• Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).
• Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.
• Ruggedly built, yet lighter weight for easier installation. No piping flues, valves, or traps.
• Individually adjustable discharge louvers to control air flow.
• Meets all UL, NEC, and OSHA requirements.
10/03/2007
Qmark QTS1504T Electric Kickspace Heater (240_volts)
Qmark QTS1504T Electric Kickspace Heaters
Electric kickspace heater will heat a 150 sq. ft. room.
Electric kickspace heater will heat a 150 sq. ft. room.
Dimension:
Front Grille Dimension
3 5/8"H x 15 3/8" W
Back Box:
3 1/2"H x 8 7/8"D x 14 1/8"W
Qmark QTS1504T
- 240 Volts
- 1,500 Watts
- 5,120 BTU/HR
- 6.3 Amps
- 10 Lbs
Qmark QTS1504T =
- 208 Volts
- 1,125 Watts
- 3,840 BTU/HR
- 5.4 Amps
Made In U.S.A.
APPLICATIONS:
- Where all the wall space is used up by appliances and cabinets in your kitchen, bathroom. basement or den, a toe-space heater will fit where no other heater will. It can be recessed into toe space areas under kitchen or utility room cabinets or into the soffit area above them.
It can also be recessed into the risers of a stairway or under the vanity in the bathroom. It is convenient for checkout counters, ticket or toll booths and many other places where no other heater seems to fit.
Front Grille Dimension
3 5/8"H x 15 3/8" W
Back Box:
3 1/2"H x 8 7/8"D x 14 1/8"W
Qmark QTS1504T
- 240 Volts
- 1,500 Watts
- 5,120 BTU/HR
- 6.3 Amps
- 10 Lbs
Qmark QTS1504T =
- 208 Volts
- 1,125 Watts
- 3,840 BTU/HR
- 5.4 Amps
Made In U.S.A.
APPLICATIONS:
- Where all the wall space is used up by appliances and cabinets in your kitchen, bathroom. basement or den, a toe-space heater will fit where no other heater will. It can be recessed into toe space areas under kitchen or utility room cabinets or into the soffit area above them.
It can also be recessed into the risers of a stairway or under the vanity in the bathroom. It is convenient for checkout counters, ticket or toll booths and many other places where no other heater seems to fit.
9/05/2007
Qmark CWH1151DS-AG Electric Wall Heater
Qmark CWH1151DS-AG Electric wall heaters
Model Qmark CWH1151-DS :
Features: Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area.
FAN DELAY: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during start up. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level.
Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment.
Motor is totally enclosed, impedance protected with permanently lubricated bearings.
Airflow system maximizes air volume at minimum noise level; 65 CFM.
Rugged louvered commercial grade steel grille creates downflow air pattern.
The heater may be wired with standard building wire (60°C). Refer to specification chart for correct supply voltage and wire size.
Built-in snap action thermostat (no radio/TV interference; 40° - 85°F). A hole plug is provided for tamper resistant installations. Includes Built-In Disconnect Switch. Staturay Bronze durable polyester powder coat finish and aluminum finish.
Model Qmark CWH1151-DS :
Features: Heating element is heavy duty steel fins brazed to steel sheathed tubular elements in a grid pattern that covers the entire discharge area.
FAN DELAY: On a call for heat, element is energized but fan is delayed until element is warm, eliminating the circulation of cold air during start up. When the thermostat is satisfied, the element is de-energized, but the fan continues until all heated air is discharged providing longer component life and higher comfort level.
Designed for easy installation. Heater is mounted prior to wiring. Both hands are free to make field connections in roomy compartment.
Motor is totally enclosed, impedance protected with permanently lubricated bearings.
Airflow system maximizes air volume at minimum noise level; 65 CFM.
Rugged louvered commercial grade steel grille creates downflow air pattern.
The heater may be wired with standard building wire (60°C). Refer to specification chart for correct supply voltage and wire size.
Built-in snap action thermostat (no radio/TV interference; 40° - 85°F). A hole plug is provided for tamper resistant installations. Includes Built-In Disconnect Switch. Staturay Bronze durable polyester powder coat finish and aluminum finish.
JUW - Washdown Corrosion Resistant Unit Heaters
JUW Series unit heater is designed for comfort heating or freeze protection in non-hazardous dusty/dirty environments including: waste water treatment plants, coal handling areas, food processing plants, foundries, steel mills, cement plants, car washes, swimming pool areas, canneries and dairies.
JUW Series washdown heater is a reliable, rugged, self-contained, UL and CSA listed, corrosion resistant unit heater. This unit offers both corrosion protection in harsh environments and the ability to be hosed down for cleaning. Users are therefore assured of an ideal heat source for freeze protection or comfort heat in non-hazardous, dirty and corrosive areas such as waste water treatment plants, ships, factories and construction sites.
All components are designed to be moisture and corrosion resistant.
A sturdy Type 304 stainless steel case surrounds industrial grade 316 stainless steel finned tubular elements.
The motor is a totally enclosed, permanently lubricated, ball bearing type which is epoxy painted for moisture and corrosion resistance.
The junction box which houses the built-in controls and element terminals is rated NEMA 4X.
Dependable air flow comes from a spark resistant, epoxy coated aluminum fan.
Power contactor, motor contactor, epoxy sealed automatic over-temperature cutout, internal thermostat (55ºF - 105ºF), pilot light to indicate when unit is in operation mode, and selector switch (heater on/off, fan only) are standard.
Stainless steel universal type swivel mounting bracket supplied with heater.
Fan delay on all Models 5kW or larger.
JUW Series washdown heater is a reliable, rugged, self-contained, UL and CSA listed, corrosion resistant unit heater. This unit offers both corrosion protection in harsh environments and the ability to be hosed down for cleaning. Users are therefore assured of an ideal heat source for freeze protection or comfort heat in non-hazardous, dirty and corrosive areas such as waste water treatment plants, ships, factories and construction sites.
All components are designed to be moisture and corrosion resistant.
A sturdy Type 304 stainless steel case surrounds industrial grade 316 stainless steel finned tubular elements.
The motor is a totally enclosed, permanently lubricated, ball bearing type which is epoxy painted for moisture and corrosion resistance.
The junction box which houses the built-in controls and element terminals is rated NEMA 4X.
Dependable air flow comes from a spark resistant, epoxy coated aluminum fan.
Power contactor, motor contactor, epoxy sealed automatic over-temperature cutout, internal thermostat (55ºF - 105ºF), pilot light to indicate when unit is in operation mode, and selector switch (heater on/off, fan only) are standard.
Stainless steel universal type swivel mounting bracket supplied with heater.
Fan delay on all Models 5kW or larger.
Subscribe to:
Posts (Atom)
